Single Ply
Single ply roofing is made from large waterproof sheets applied directly to the roof deck or on top of a layer of insulation which forms a watertight membrane. A single ply roof will stand up to years of direct sunlight, torrential rain and high winds. Have a new or re-roof need? Consider a single ply system that All American Roofing Roofing will install.
Single Ply PVC
PVC roofs are thermoplastic sheets available in standard white and a variety of designer colors. PVC membrane is sealed together with hot air forming a seam stronger than the sheet itself. All American Roofing installs PVC made by Sarnafil, the industry leader in heat weldable membranes.
Single Ply EPDM
EPDM roofs are thermo-set rubber sheets available in black or white. EPDM membrane is sealed using special adhesives or self-adhering tapes. All American Roofing Roofing installs EPDM roofs primarily manufactured by Carlisle Syntec Systems, the oldest and most respected company in the rubber roof industry.
Single Ply TPO
A relatively new single ply technology, TPO is also heat welded like PVC and is backed by respected companies like Sarnafil, Carlisle, and Firestone. All American Roofing Roofing can install a quality single ply TPO system for you.
Modified bitumen roofs are factory- fabricated sheets using fiberglass or polyester, laminated with rubberized asphalt. These sheets are factory surfaced with various colored mineral granules or metal films. Modified roofs are installed with hot asphalt, cold adhesives or open flame torches. All American Roofing Roofing installs modified bitumen roofs from several of the industry's finest manufacturers, including GAF Building Products, Tamko Asphalt Products, Siplast, Tremco, Johns Manville, and Firestone.
Built-up roofs are multiple layers of fiber glass felts adhered with hot asphalt and surfaced with various products. Built-up roofs have been installed on low sloped roofs for over one hundred years. All American Roofing Roofing installs built up roofs manufactured by several of the finest manufacturers in the industry, including GAF Building Products, Tamko Asphalt Products, Johns Manville, and Tremco.
Big or small, smooth or gravel surface, All American Roofing can handle all of your built-up needs.
Metal Roofs
Metal roofs are fabricated primarily from steel, aluminum and aluminized steel. They are available with long life finishes or unfinished. The best performers are typically standing seam profile panels. All American Roofing Roofing installs metal roofs manufactured by several companies, including American Buildings, Petersen, and McElroy, for new or re-roof applications.
In 2008, Rock Manor Golf Country Club underwent a major renovation. All American Roofing Roofing was selected to provide the new metal roof because of our expertise and reputation for quality.
Roof Restorations and Coatings
All roofs as they age will show signs of wear. However, if a roof has not badly deteriorated, All American Roofing Roofing coatings crews can provide a roof restoration that will greatly extend the life of the roof.
A roof restoration is more than just a coating, it is an entire system. All American Roofing Roofing seals and reinforces seams, fasteners, penetrations, etc., then coats the entire roof with an elastomeric product. All American Roofing Roofing has restored smooth and granular surface built up roofs, modified bitumen roofs, single ply roofs and metal roofs at a cost significantly less than conventional reroofing.
Before Restoration
After Restoration
All American Roofing Roofing is an approved applicator for Topcoat and Tremco coating systems, and both manufacturers provide a ten-year warranty or longer under certain specifications.
An All American Roofing Roofing restoration can save you money in other ways: The white coating is highly reflective which greatly reduces cooling costs, and savvy business owners understand the advantages of restoring a roof compared to the capital expense involved with a conventional reroofing project.